1

Basyuk T.

 

 

 

 

 

 

 

7

 

 

 

“Sintering of high  thermostable diamond containing composites in the systems with max-materials at high pressures and temperature”

 

Effect of high pressure and temperature on the structure and properties of solid solutions of the MAX phases: connection Ti3 (AlxSn (1-x) C2 and Ti2Al (CxN 1-x)

 

 

 

 

 

 

 

 

Prikhna T.

 

Upper - Intermediate

2

Kozyrev A.

Regularities of formation of phases of functional ceramic materials at high pressures and temperatures.

Intermediate

3

Serbenyuk T.

"Patterns of forming a ceramic material based on AlN-SiC with desired functional properties of electrical and structural purpose"

Intermediate

4

Starostina A.

The correlation between the nanostructural features and functional characteristics of materials based on Ti (Cr)-Al (Si)-N (C) - and Mg-BO obtained by the methods of pulsed plasma sintering and hot press

 

Intermediate

5.

 

Turkevich D.

1

Experimental study of oxidation of MAX-materials at high temperatures and thermodynamic calculation of phase equilibria at high pressures

 

 

 

 

Turkevich V.

Intermediate

6.

Tonkoshkura M.

1

"Phase equilibria and synthesis of new phases in the Al - B - C at high pressures and over a wide temperature range"

Intermediate

7.

Kolabylina T.

1

Synthesis of thermostable diamond-containing materials in the systems with binary carbides

Intermediate

1.

Andreev.I.

 

 

 

 

 

 

 

4

 

 

 

 

 

 

"Creating of new class of wear resistant materials with coarse-grained skeletal structure  impregnated with metals, their alloys, ceramic and organic materials"

 

Investigation of structure and properties of alloys based on tungsten and tungsten carbide

 

 

 

 

 

 

Bondarenko V.P.

 

 

Pre-Intermediate

 

2

Gnatenko I.

The study of the microstructure of hard alloys, "Development of a method of quantitative evaluation of stereometric characteristics of the carbide skeleton of hard alloys,"

   Elementary

 

3

Ievdokymova O.

 

   "Regularities of formation of structure and properties of porous composite powders with coarse grains high modyles carbides, coated with plastics metals."

Intermediate

4.

Savchuk I.

 

 

Intermediate

5.

Matviychuk A.

"Establishment of laws from the gas phase carburization of tungsten and containing tungsten  compounds and patterns of microstructure and physical properties of hard alloys and composite materials based on them"

Pre-Intermediate

 

1

Garbuz T.

 

 

 

 

         1

 

“The study of macro-, micro-and nanostructural characteristics of the formation at high pressure composite cubic boron nitride, materials development tool use and innovative technology of synthesis of BN powders”

 

The study of macro-, micro-and nanostructural characteristics of the formation at high pressure composite cubic boron nitride, materials development tool use and innovative technology of synthesis of BN powders

 

Intermediate

2.

Konoval S.

Regularities of formation of structure and properties of superhard composites by reaction sintering of cubic boron nitride with aluminum at high pressure.

Bezhenar V.P.

Intermediate

3.

 

Nikishina M.

The study of penetration of cBN materials by liquid metals at high pressure

Petrusha I.A.

Intermediate

1.

Klimenko S.

 

 

 

 

 

     18

 

 

 

 

 

 

"Increasing the stability of cutting tools with PNTM based CBN due to thermal management as in the cutting zone."

 

 

"Increasing the stability of cutting tools with PNTM based CBN due to thermal management as in the cutting zone."

 

 

 

 

 

 

 

Klimenko S.

 

 

 

Intermediate

 

2.

Manokhin A.

Common areas of work:

Intermediate

3.

Osadchy A.

Machining processes, machines and tools. Increased tool life of CBN in finish turning of hardened steels by providing a vibration resistance of the incisors.

 

Intermediate

 

1.

Smokbuna V.

 

 

 

      3

 

 

 

 

 

“Increased wear resistance of high-precision tool of the ruling by the directed use of synthetic diamonds with increased strength”

 

Increased wear resistance of the grinding tool aimed STM thermal effects on surface cutting grains

 

 

 

 

 

Lavrinenko V.

 

 

 

2.

Suharev D.

Increased wear resistance of high-precision tool of the ruling by the directed use of synthetic diamonds with increased strength

 

3.

Podoba  Ya.

"Regularities of compaction and consolidation of composite materials containing a diamond metal bond in extensive electric sintering"

Intermediate

4.

Pidgornuk E

 

13

"Influence of cultivation conditions on the dislocation structure of diamond by the temperature gradient

Ivakhnenko S.

Starter

5.

Savchenko D.

6

Regularities of formation of the structure of hybrid organic-inorganic composites of diamond tools

PashenkoE.

 Upper - Intermediate

1.

Tcisar T.

 

 

11

 

 

 

“Sintering of nanocrystalline diamond composites with different binders at high pressure”

 

"Optimization of Process Parameters injection molding of structural ceramics based on computer simulation"

Leshchuk A.A.

Pre - Intermediate

 

2

Ievdokymov I.

Calculation and experimental optimization of mechanical properties of ceramic materials based on B4C

Leshchuk A.A.

Intermediate

3.

Svirid K.

 

 

 

14

 

Create a conductive polycrystals and composites based on diamond for use in elekrochemistry

 

 

Bochechka A.

 

 

 

4

Nazarchuk O.

 

Intermediate

 

 

5.

Lutsak E.

 

 

6

Chernienko